diff --git a/Dockerfile.template b/Dockerfile.template index 220294b08f..e8b48069b8 100644 --- a/Dockerfile.template +++ b/Dockerfile.template @@ -1,6 +1,14 @@ {{ def is_alpine: env.variant | index("alpine") + ; + # PHP 8.6+ images no longer ship pear/pecl or a compiled-in mbstring: https://github.com/docker-library/php/pull/1654 + def has_pecl: + env.phpVersion | IN("8.2", "8.3", "8.4", "8.5") + ; + # no imagick release supports PHP 8.6 yet (https://github.com/Imagick/imagick/issues/768), and installing it without pecl is pending https://github.com/docker-library/wordpress/pull/1001 + def has_imagick: + has_pecl -}} FROM php:{{ env.phpVersion }}-{{ env.variant }} @@ -54,12 +62,17 @@ RUN set -ex; \ $PHPIZE_DEPS \ freetype-dev \ icu-dev \ +{{ if has_imagick then ( -}} imagemagick-dev libheif-dev \ +{{ ) else "" end -}} libavif-dev \ libjpeg-turbo-dev \ libpng-dev \ libwebp-dev \ libzip-dev \ +{{ if has_pecl then "" else ( -}} + oniguruma-dev \ +{{ ) end -}} ; \ {{ ) else ( -}} savedAptMark="$(apt-mark showmanual)"; \ @@ -70,10 +83,15 @@ RUN set -ex; \ libfreetype6-dev \ libicu-dev \ libjpeg-dev \ +{{ if has_imagick then ( -}} libmagickwand-dev \ +{{ ) else "" end -}} libpng-dev \ libwebp-dev \ libzip-dev \ +{{ if has_pecl then "" else ( -}} + libonig-dev \ +{{ ) end -}} ; \ {{ ) end -}} \ @@ -90,7 +108,11 @@ RUN set -ex; \ intl \ mysqli \ zip \ +{{ if has_pecl then "" else ( -}} + mbstring \ +{{ ) end -}} ; \ +{{ if has_imagick then ( -}} {{ if is_alpine then ( -}} # WARNING: imagick is likely not supported on Alpine: https://github.com/Imagick/imagick/issues/328 {{ ) else "" end -}} @@ -98,6 +120,7 @@ RUN set -ex; \ pecl install imagick-3.8.1; \ docker-php-ext-enable imagick; \ rm -r /tmp/pear; \ +{{ ) else "" end -}} \ # some misbehaving extensions end up outputting to stdout 🙈 (https://github.com/docker-library/wordpress/issues/669#issuecomment-993945967) out="$(php -r 'exit(0);')"; \ diff --git a/beta/php8.6-rc/apache/Dockerfile b/beta/php8.6-rc/apache/Dockerfile new file mode 100644 index 0000000000..b145aee462 --- /dev/null +++ b/beta/php8.6-rc/apache/Dockerfile @@ -0,0 +1,173 @@ +# +# NOTE: THIS DOCKERFILE IS GENERATED VIA "apply-templates.sh" +# +# PLEASE DO NOT EDIT IT DIRECTLY. +# + +FROM php:8.6-rc-apache + +# persistent dependencies +RUN set -eux; \ + apt-get update; \ + apt-get install -y --no-install-recommends \ +# Ghostscript is required for rendering PDF previews + ghostscript \ +# pull in AV1 & HEVC image encoding (and not just decoding) +# https://github.com/docker-library/wordpress/issues/996 + libheif-plugin-aomenc \ + libheif-plugin-x265 \ + ; \ + rm -rf /var/lib/apt/lists/* + +# install the PHP extensions we need (https://make.wordpress.org/hosting/handbook/handbook/server-environment/#php-extensions) +RUN set -ex; \ + \ + savedAptMark="$(apt-mark showmanual)"; \ + \ + apt-get update; \ + apt-get install -y --no-install-recommends \ + libavif-dev \ + libfreetype6-dev \ + libicu-dev \ + libjpeg-dev \ + libpng-dev \ + libwebp-dev \ + libzip-dev \ + libonig-dev \ + ; \ + \ + docker-php-ext-configure gd \ + --with-avif \ + --with-freetype \ + --with-jpeg \ + --with-webp \ + ; \ + docker-php-ext-install -j "$(nproc)" \ + bcmath \ + exif \ + gd \ + intl \ + mysqli \ + zip \ + mbstring \ + ; \ + \ +# some misbehaving extensions end up outputting to stdout 🙈 (https://github.com/docker-library/wordpress/issues/669#issuecomment-993945967) + out="$(php -r 'exit(0);')"; \ + [ -z "$out" ]; \ + err="$(php -r 'exit(0);' 3>&1 1>&2 2>&3)"; \ + [ -z "$err" ]; \ + \ + extDir="$(php -r 'echo ini_get("extension_dir");')"; \ + [ -d "$extDir" ]; \ +# reset apt-mark's "manual" list so that "purge --auto-remove" will remove all build dependencies + apt-mark auto '.*' > /dev/null; \ + apt-mark manual $savedAptMark; \ + ldd "$extDir"/*.so \ + | awk '/=>/ { so = $(NF-1); if (index(so, "/usr/local/") == 1) { next }; gsub("^/(usr/)?", "", so); printf "*%s\n", so }' \ + | sort -u \ + | xargs -r dpkg-query --search \ + | cut -d: -f1 \ + | sort -u \ + | xargs -rt apt-mark manual; \ + \ + apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false; \ + rm -rf /var/lib/apt/lists/*; \ + \ + ! { ldd "$extDir"/*.so | grep 'not found'; }; \ +# check for output like "PHP Warning: PHP Startup: Unable to load dynamic library 'foo' (tried: ...) + err="$(php --version 3>&1 1>&2 2>&3)"; \ + [ -z "$err" ] + +# set recommended PHP.ini settings +# see https://secure.php.net/manual/en/opcache.installation.php +# enabled by default in the php images: https://github.com/docker-library/php/pull/1587 +RUN set -eux; \ + { \ + echo 'opcache.memory_consumption=128'; \ + echo 'opcache.interned_strings_buffer=8'; \ + echo 'opcache.max_accelerated_files=4000'; \ + echo 'opcache.revalidate_freq=2'; \ + } > "$PHP_INI_DIR/conf.d/opcache-recommended.ini" +# https://wordpress.org/support/article/editing-wp-config-php/#configure-error-logging +RUN set -eux; \ + { \ +# https://www.php.net/manual/en/errorfunc.constants.php +# https://github.com/docker-library/wordpress/issues/420#issuecomment-517839670 + echo 'error_reporting = E_ERROR | E_WARNING | E_PARSE | E_CORE_ERROR | E_CORE_WARNING | E_COMPILE_ERROR | E_COMPILE_WARNING | E_RECOVERABLE_ERROR'; \ + echo 'display_errors = Off'; \ + echo 'display_startup_errors = Off'; \ + echo 'log_errors = On'; \ + echo 'error_log = /dev/stderr'; \ + echo 'log_errors_max_len = 1024'; \ + echo 'ignore_repeated_errors = On'; \ + echo 'ignore_repeated_source = Off'; \ + echo 'html_errors = Off'; \ + } > "$PHP_INI_DIR/conf.d/error-logging.ini" + +RUN set -eux; \ + a2enmod rewrite expires; \ + \ +# https://httpd.apache.org/docs/2.4/mod/mod_remoteip.html + a2enmod remoteip; \ + { \ + echo 'RemoteIPHeader X-Forwarded-For'; \ +# these IP ranges are reserved for "private" use and should thus *usually* be safe inside Docker + echo 'RemoteIPInternalProxy 10.0.0.0/8'; \ + echo 'RemoteIPInternalProxy 172.16.0.0/12'; \ + echo 'RemoteIPInternalProxy 192.168.0.0/16'; \ + echo 'RemoteIPInternalProxy 169.254.0.0/16'; \ + echo 'RemoteIPInternalProxy 127.0.0.0/8'; \ + } > /etc/apache2/conf-available/remoteip.conf; \ + a2enconf remoteip; \ +# https://github.com/docker-library/wordpress/issues/383#issuecomment-507886512 +# (replace all instances of "%h" with "%a" in LogFormat) + find /etc/apache2 -type f -name '*.conf' -exec sed -ri 's/([[:space:]]*LogFormat[[:space:]]+"[^"]*)%h([^"]*")/\1%a\2/g' '{}' + + +RUN set -eux; \ + version='7.2-beta4'; \ + sha1='10ece733e01d895936afb85e1862b94954242f91'; \ + \ + curl -o wordpress.tar.gz -fL "https://wordpress.org/wordpress-$version.tar.gz"; \ + echo "$sha1 *wordpress.tar.gz" | sha1sum -c -; \ + \ +# upstream tarballs include ./wordpress/ so this gives us /usr/src/wordpress + tar -xzf wordpress.tar.gz -C /usr/src/; \ + rm wordpress.tar.gz; \ + \ +# https://wordpress.org/support/article/htaccess/ + [ ! -e /usr/src/wordpress/.htaccess ]; \ + { \ + echo '# BEGIN WordPress'; \ + echo ''; \ + echo 'RewriteEngine On'; \ + echo 'RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]'; \ + echo 'RewriteBase /'; \ + echo 'RewriteRule ^index\.php$ - [L]'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-f'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-d'; \ + echo 'RewriteRule . /index.php [L]'; \ + echo ''; \ + echo '# END WordPress'; \ + } > /usr/src/wordpress/.htaccess; \ + \ + chown -R www-data:www-data /usr/src/wordpress; \ +# pre-create wp-content (and single-level children) for folks who want to bind-mount themes, etc so permissions are pre-created properly instead of root:root +# wp-content/cache: https://github.com/docker-library/wordpress/issues/534#issuecomment-705733507 + mkdir wp-content; \ + for dir in /usr/src/wordpress/wp-content/*/ cache; do \ + dir="$(basename "${dir%/}")"; \ + mkdir "wp-content/$dir"; \ + done; \ + chown -R www-data:www-data wp-content; \ + chmod -R 1777 wp-content + +VOLUME /var/www/html + +COPY --chown=www-data:www-data wp-config-docker.php /usr/src/wordpress/ +COPY docker-entrypoint.sh /usr/local/bin/ +# https://github.com/docker-library/wordpress/issues/969 +RUN ln -svfT docker-entrypoint.sh /usr/local/bin/docker-ensure-installed.sh + +ENTRYPOINT ["docker-entrypoint.sh"] +CMD ["apache2-foreground"] diff --git a/beta/php8.6-rc/apache/docker-entrypoint.sh b/beta/php8.6-rc/apache/docker-entrypoint.sh new file mode 100755 index 0000000000..dad730375c --- /dev/null +++ b/beta/php8.6-rc/apache/docker-entrypoint.sh @@ -0,0 +1,99 @@ +#!/usr/bin/env bash +set -Eeuo pipefail + +if [[ "${1-}" == apache2* ]] || [ "${1-}" = 'php-fpm' ] || { self="$(basename "$0")" && [ "$self" = 'docker-ensure-installed.sh' ]; }; then + uid="$(id -u)" + gid="$(id -g)" + if [ "$uid" = '0' ]; then + case "${1-}" in + apache2*) + user="${APACHE_RUN_USER:-www-data}" + group="${APACHE_RUN_GROUP:-www-data}" + + # strip off any '#' symbol ('#1000' is valid syntax for Apache) + pound='#' + user="${user#$pound}" + group="${group#$pound}" + ;; + *) # php-fpm + user='www-data' + group='www-data' + ;; + esac + else + user="$uid" + group="$gid" + fi + + if [ ! -e index.php ] && [ ! -e wp-includes/version.php ]; then + # if the directory exists and WordPress doesn't appear to be installed AND the permissions of it are root:root, let's chown it (likely a Docker-created directory) + if [ "$uid" = '0' ] && [ "$(stat -c '%u:%g' .)" = '0:0' ]; then + chown "$user:$group" . + fi + + echo >&2 "WordPress not found in $PWD - copying now..." + if [ -n "$(find -mindepth 1 -maxdepth 1 -not -name wp-content)" ]; then + echo >&2 "WARNING: $PWD is not empty! (copying anyhow)" + fi + sourceTarArgs=( + --create + --file - + --directory /usr/src/wordpress + --owner "$user" --group "$group" + ) + targetTarArgs=( + --extract + --file - + ) + if [ "$uid" != '0' ]; then + # avoid "tar: .: Cannot utime: Operation not permitted" and "tar: .: Cannot change mode to rwxr-xr-x: Operation not permitted" + targetTarArgs+=( --no-overwrite-dir ) + fi + # loop over "pluggable" content in the source, and if it already exists in the destination, skip it + # https://github.com/docker-library/wordpress/issues/506 ("wp-content" persisted, "akismet" updated, WordPress container restarted/recreated, "akismet" downgraded) + for contentPath in \ + /usr/src/wordpress/.htaccess \ + /usr/src/wordpress/wp-content/*/*/ \ + ; do + contentPath="${contentPath%/}" + [ -e "$contentPath" ] || continue + contentPath="${contentPath#/usr/src/wordpress/}" # "wp-content/plugins/akismet", etc. + if [ -e "$PWD/$contentPath" ]; then + echo >&2 "WARNING: '$PWD/$contentPath' exists! (not copying the WordPress version)" + sourceTarArgs+=( --exclude "./$contentPath" ) + fi + done + tar "${sourceTarArgs[@]}" . | tar "${targetTarArgs[@]}" + echo >&2 "Complete! WordPress has been successfully copied to $PWD" + fi + + wpEnvs=( "${!WORDPRESS_@}" ) + if [ ! -s wp-config.php ] && [ "${#wpEnvs[@]}" -gt 0 ]; then + for wpConfigDocker in \ + wp-config-docker.php \ + /usr/src/wordpress/wp-config-docker.php \ + ; do + if [ -s "$wpConfigDocker" ]; then + echo >&2 "No 'wp-config.php' found in $PWD, but 'WORDPRESS_...' variables supplied; copying '$wpConfigDocker' (${wpEnvs[*]})" + # using "awk" to replace all instances of "put your unique phrase here" with a properly unique string (for AUTH_KEY and friends to have safe defaults if they aren't specified with environment variables) + awk ' + /put your unique phrase here/ { + cmd = "head -c1m /dev/urandom | sha1sum | cut -d\\ -f1" + cmd | getline str + close(cmd) + gsub("put your unique phrase here", str) + } + { print } + ' "$wpConfigDocker" > wp-config.php + if [ "$uid" = '0' ]; then + # attempt to ensure that wp-config.php is owned by the run user + # could be on a filesystem that doesn't allow chown (like some NFS setups) + chown "$user:$group" wp-config.php || true + fi + break + fi + done + fi +fi + +exec "$@" diff --git a/beta/php8.6-rc/apache/wp-config-docker.php b/beta/php8.6-rc/apache/wp-config-docker.php new file mode 100644 index 0000000000..ada2ee3c9e --- /dev/null +++ b/beta/php8.6-rc/apache/wp-config-docker.php @@ -0,0 +1,139 @@ +&1 1>&2 2>&3)"; \ + [ -z "$err" ]; \ + \ + extDir="$(php -r 'echo ini_get("extension_dir");')"; \ + [ -d "$extDir" ]; \ + runDeps="$( \ + scanelf --needed --nobanner --format '%n#p' --recursive "$extDir" \ + | tr ',' '\n' \ + | sort -u \ + | awk 'system("[ -e /usr/local/lib/" $1 " ]") == 0 { next } { print "so:" $1 }' \ + )"; \ + apk add --no-network --virtual .wordpress-phpexts-rundeps $runDeps; \ + apk del --no-network .build-deps; \ + \ + ! { ldd "$extDir"/*.so | grep 'not found'; }; \ +# check for output like "PHP Warning: PHP Startup: Unable to load dynamic library 'foo' (tried: ...) + err="$(php --version 3>&1 1>&2 2>&3)"; \ + [ -z "$err" ] + +# set recommended PHP.ini settings +# see https://secure.php.net/manual/en/opcache.installation.php +# enabled by default in the php images: https://github.com/docker-library/php/pull/1587 +RUN set -eux; \ + { \ + echo 'opcache.memory_consumption=128'; \ + echo 'opcache.interned_strings_buffer=8'; \ + echo 'opcache.max_accelerated_files=4000'; \ + echo 'opcache.revalidate_freq=2'; \ + } > "$PHP_INI_DIR/conf.d/opcache-recommended.ini" +# https://wordpress.org/support/article/editing-wp-config-php/#configure-error-logging +RUN set -eux; \ + { \ +# https://www.php.net/manual/en/errorfunc.constants.php +# https://github.com/docker-library/wordpress/issues/420#issuecomment-517839670 + echo 'error_reporting = E_ERROR | E_WARNING | E_PARSE | E_CORE_ERROR | E_CORE_WARNING | E_COMPILE_ERROR | E_COMPILE_WARNING | E_RECOVERABLE_ERROR'; \ + echo 'display_errors = Off'; \ + echo 'display_startup_errors = Off'; \ + echo 'log_errors = On'; \ + echo 'error_log = /dev/stderr'; \ + echo 'log_errors_max_len = 1024'; \ + echo 'ignore_repeated_errors = On'; \ + echo 'ignore_repeated_source = Off'; \ + echo 'html_errors = Off'; \ + } > "$PHP_INI_DIR/conf.d/error-logging.ini" + +RUN set -eux; \ + version='7.2-beta4'; \ + sha1='10ece733e01d895936afb85e1862b94954242f91'; \ + \ + curl -o wordpress.tar.gz -fL "https://wordpress.org/wordpress-$version.tar.gz"; \ + echo "$sha1 *wordpress.tar.gz" | sha1sum -c -; \ + \ +# upstream tarballs include ./wordpress/ so this gives us /usr/src/wordpress + tar -xzf wordpress.tar.gz -C /usr/src/; \ + rm wordpress.tar.gz; \ + \ +# https://wordpress.org/support/article/htaccess/ + [ ! -e /usr/src/wordpress/.htaccess ]; \ + { \ + echo '# BEGIN WordPress'; \ + echo ''; \ + echo 'RewriteEngine On'; \ + echo 'RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]'; \ + echo 'RewriteBase /'; \ + echo 'RewriteRule ^index\.php$ - [L]'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-f'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-d'; \ + echo 'RewriteRule . /index.php [L]'; \ + echo ''; \ + echo '# END WordPress'; \ + } > /usr/src/wordpress/.htaccess; \ + \ + chown -R www-data:www-data /usr/src/wordpress; \ +# pre-create wp-content (and single-level children) for folks who want to bind-mount themes, etc so permissions are pre-created properly instead of root:root +# wp-content/cache: https://github.com/docker-library/wordpress/issues/534#issuecomment-705733507 + mkdir wp-content; \ + for dir in /usr/src/wordpress/wp-content/*/ cache; do \ + dir="$(basename "${dir%/}")"; \ + mkdir "wp-content/$dir"; \ + done; \ + chown -R www-data:www-data wp-content; \ + chmod -R 1777 wp-content + +VOLUME /var/www/html + +COPY --chown=www-data:www-data wp-config-docker.php /usr/src/wordpress/ +COPY docker-entrypoint.sh /usr/local/bin/ +# https://github.com/docker-library/wordpress/issues/969 +RUN ln -svfT docker-entrypoint.sh /usr/local/bin/docker-ensure-installed.sh + +ENTRYPOINT ["docker-entrypoint.sh"] +CMD ["php-fpm"] diff --git a/beta/php8.6-rc/fpm-alpine/docker-entrypoint.sh b/beta/php8.6-rc/fpm-alpine/docker-entrypoint.sh new file mode 100755 index 0000000000..dad730375c --- /dev/null +++ b/beta/php8.6-rc/fpm-alpine/docker-entrypoint.sh @@ -0,0 +1,99 @@ +#!/usr/bin/env bash +set -Eeuo pipefail + +if [[ "${1-}" == apache2* ]] || [ "${1-}" = 'php-fpm' ] || { self="$(basename "$0")" && [ "$self" = 'docker-ensure-installed.sh' ]; }; then + uid="$(id -u)" + gid="$(id -g)" + if [ "$uid" = '0' ]; then + case "${1-}" in + apache2*) + user="${APACHE_RUN_USER:-www-data}" + group="${APACHE_RUN_GROUP:-www-data}" + + # strip off any '#' symbol ('#1000' is valid syntax for Apache) + pound='#' + user="${user#$pound}" + group="${group#$pound}" + ;; + *) # php-fpm + user='www-data' + group='www-data' + ;; + esac + else + user="$uid" + group="$gid" + fi + + if [ ! -e index.php ] && [ ! -e wp-includes/version.php ]; then + # if the directory exists and WordPress doesn't appear to be installed AND the permissions of it are root:root, let's chown it (likely a Docker-created directory) + if [ "$uid" = '0' ] && [ "$(stat -c '%u:%g' .)" = '0:0' ]; then + chown "$user:$group" . + fi + + echo >&2 "WordPress not found in $PWD - copying now..." + if [ -n "$(find -mindepth 1 -maxdepth 1 -not -name wp-content)" ]; then + echo >&2 "WARNING: $PWD is not empty! (copying anyhow)" + fi + sourceTarArgs=( + --create + --file - + --directory /usr/src/wordpress + --owner "$user" --group "$group" + ) + targetTarArgs=( + --extract + --file - + ) + if [ "$uid" != '0' ]; then + # avoid "tar: .: Cannot utime: Operation not permitted" and "tar: .: Cannot change mode to rwxr-xr-x: Operation not permitted" + targetTarArgs+=( --no-overwrite-dir ) + fi + # loop over "pluggable" content in the source, and if it already exists in the destination, skip it + # https://github.com/docker-library/wordpress/issues/506 ("wp-content" persisted, "akismet" updated, WordPress container restarted/recreated, "akismet" downgraded) + for contentPath in \ + /usr/src/wordpress/.htaccess \ + /usr/src/wordpress/wp-content/*/*/ \ + ; do + contentPath="${contentPath%/}" + [ -e "$contentPath" ] || continue + contentPath="${contentPath#/usr/src/wordpress/}" # "wp-content/plugins/akismet", etc. + if [ -e "$PWD/$contentPath" ]; then + echo >&2 "WARNING: '$PWD/$contentPath' exists! (not copying the WordPress version)" + sourceTarArgs+=( --exclude "./$contentPath" ) + fi + done + tar "${sourceTarArgs[@]}" . | tar "${targetTarArgs[@]}" + echo >&2 "Complete! WordPress has been successfully copied to $PWD" + fi + + wpEnvs=( "${!WORDPRESS_@}" ) + if [ ! -s wp-config.php ] && [ "${#wpEnvs[@]}" -gt 0 ]; then + for wpConfigDocker in \ + wp-config-docker.php \ + /usr/src/wordpress/wp-config-docker.php \ + ; do + if [ -s "$wpConfigDocker" ]; then + echo >&2 "No 'wp-config.php' found in $PWD, but 'WORDPRESS_...' variables supplied; copying '$wpConfigDocker' (${wpEnvs[*]})" + # using "awk" to replace all instances of "put your unique phrase here" with a properly unique string (for AUTH_KEY and friends to have safe defaults if they aren't specified with environment variables) + awk ' + /put your unique phrase here/ { + cmd = "head -c1m /dev/urandom | sha1sum | cut -d\\ -f1" + cmd | getline str + close(cmd) + gsub("put your unique phrase here", str) + } + { print } + ' "$wpConfigDocker" > wp-config.php + if [ "$uid" = '0' ]; then + # attempt to ensure that wp-config.php is owned by the run user + # could be on a filesystem that doesn't allow chown (like some NFS setups) + chown "$user:$group" wp-config.php || true + fi + break + fi + done + fi +fi + +exec "$@" diff --git a/beta/php8.6-rc/fpm-alpine/wp-config-docker.php b/beta/php8.6-rc/fpm-alpine/wp-config-docker.php new file mode 100644 index 0000000000..ada2ee3c9e --- /dev/null +++ b/beta/php8.6-rc/fpm-alpine/wp-config-docker.php @@ -0,0 +1,139 @@ +&1 1>&2 2>&3)"; \ + [ -z "$err" ]; \ + \ + extDir="$(php -r 'echo ini_get("extension_dir");')"; \ + [ -d "$extDir" ]; \ +# reset apt-mark's "manual" list so that "purge --auto-remove" will remove all build dependencies + apt-mark auto '.*' > /dev/null; \ + apt-mark manual $savedAptMark; \ + ldd "$extDir"/*.so \ + | awk '/=>/ { so = $(NF-1); if (index(so, "/usr/local/") == 1) { next }; gsub("^/(usr/)?", "", so); printf "*%s\n", so }' \ + | sort -u \ + | xargs -r dpkg-query --search \ + | cut -d: -f1 \ + | sort -u \ + | xargs -rt apt-mark manual; \ + \ + apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false; \ + rm -rf /var/lib/apt/lists/*; \ + \ + ! { ldd "$extDir"/*.so | grep 'not found'; }; \ +# check for output like "PHP Warning: PHP Startup: Unable to load dynamic library 'foo' (tried: ...) + err="$(php --version 3>&1 1>&2 2>&3)"; \ + [ -z "$err" ] + +# set recommended PHP.ini settings +# see https://secure.php.net/manual/en/opcache.installation.php +# enabled by default in the php images: https://github.com/docker-library/php/pull/1587 +RUN set -eux; \ + { \ + echo 'opcache.memory_consumption=128'; \ + echo 'opcache.interned_strings_buffer=8'; \ + echo 'opcache.max_accelerated_files=4000'; \ + echo 'opcache.revalidate_freq=2'; \ + } > "$PHP_INI_DIR/conf.d/opcache-recommended.ini" +# https://wordpress.org/support/article/editing-wp-config-php/#configure-error-logging +RUN set -eux; \ + { \ +# https://www.php.net/manual/en/errorfunc.constants.php +# https://github.com/docker-library/wordpress/issues/420#issuecomment-517839670 + echo 'error_reporting = E_ERROR | E_WARNING | E_PARSE | E_CORE_ERROR | E_CORE_WARNING | E_COMPILE_ERROR | E_COMPILE_WARNING | E_RECOVERABLE_ERROR'; \ + echo 'display_errors = Off'; \ + echo 'display_startup_errors = Off'; \ + echo 'log_errors = On'; \ + echo 'error_log = /dev/stderr'; \ + echo 'log_errors_max_len = 1024'; \ + echo 'ignore_repeated_errors = On'; \ + echo 'ignore_repeated_source = Off'; \ + echo 'html_errors = Off'; \ + } > "$PHP_INI_DIR/conf.d/error-logging.ini" + +RUN set -eux; \ + version='7.2-beta4'; \ + sha1='10ece733e01d895936afb85e1862b94954242f91'; \ + \ + curl -o wordpress.tar.gz -fL "https://wordpress.org/wordpress-$version.tar.gz"; \ + echo "$sha1 *wordpress.tar.gz" | sha1sum -c -; \ + \ +# upstream tarballs include ./wordpress/ so this gives us /usr/src/wordpress + tar -xzf wordpress.tar.gz -C /usr/src/; \ + rm wordpress.tar.gz; \ + \ +# https://wordpress.org/support/article/htaccess/ + [ ! -e /usr/src/wordpress/.htaccess ]; \ + { \ + echo '# BEGIN WordPress'; \ + echo ''; \ + echo 'RewriteEngine On'; \ + echo 'RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]'; \ + echo 'RewriteBase /'; \ + echo 'RewriteRule ^index\.php$ - [L]'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-f'; \ + echo 'RewriteCond %{REQUEST_FILENAME} !-d'; \ + echo 'RewriteRule . /index.php [L]'; \ + echo ''; \ + echo '# END WordPress'; \ + } > /usr/src/wordpress/.htaccess; \ + \ + chown -R www-data:www-data /usr/src/wordpress; \ +# pre-create wp-content (and single-level children) for folks who want to bind-mount themes, etc so permissions are pre-created properly instead of root:root +# wp-content/cache: https://github.com/docker-library/wordpress/issues/534#issuecomment-705733507 + mkdir wp-content; \ + for dir in /usr/src/wordpress/wp-content/*/ cache; do \ + dir="$(basename "${dir%/}")"; \ + mkdir "wp-content/$dir"; \ + done; \ + chown -R www-data:www-data wp-content; \ + chmod -R 1777 wp-content + +VOLUME /var/www/html + +COPY --chown=www-data:www-data wp-config-docker.php /usr/src/wordpress/ +COPY docker-entrypoint.sh /usr/local/bin/ +# https://github.com/docker-library/wordpress/issues/969 +RUN ln -svfT docker-entrypoint.sh /usr/local/bin/docker-ensure-installed.sh + +ENTRYPOINT ["docker-entrypoint.sh"] +CMD ["php-fpm"] diff --git a/beta/php8.6-rc/fpm/docker-entrypoint.sh b/beta/php8.6-rc/fpm/docker-entrypoint.sh new file mode 100755 index 0000000000..dad730375c --- /dev/null +++ b/beta/php8.6-rc/fpm/docker-entrypoint.sh @@ -0,0 +1,99 @@ +#!/usr/bin/env bash +set -Eeuo pipefail + +if [[ "${1-}" == apache2* ]] || [ "${1-}" = 'php-fpm' ] || { self="$(basename "$0")" && [ "$self" = 'docker-ensure-installed.sh' ]; }; then + uid="$(id -u)" + gid="$(id -g)" + if [ "$uid" = '0' ]; then + case "${1-}" in + apache2*) + user="${APACHE_RUN_USER:-www-data}" + group="${APACHE_RUN_GROUP:-www-data}" + + # strip off any '#' symbol ('#1000' is valid syntax for Apache) + pound='#' + user="${user#$pound}" + group="${group#$pound}" + ;; + *) # php-fpm + user='www-data' + group='www-data' + ;; + esac + else + user="$uid" + group="$gid" + fi + + if [ ! -e index.php ] && [ ! -e wp-includes/version.php ]; then + # if the directory exists and WordPress doesn't appear to be installed AND the permissions of it are root:root, let's chown it (likely a Docker-created directory) + if [ "$uid" = '0' ] && [ "$(stat -c '%u:%g' .)" = '0:0' ]; then + chown "$user:$group" . + fi + + echo >&2 "WordPress not found in $PWD - copying now..." + if [ -n "$(find -mindepth 1 -maxdepth 1 -not -name wp-content)" ]; then + echo >&2 "WARNING: $PWD is not empty! (copying anyhow)" + fi + sourceTarArgs=( + --create + --file - + --directory /usr/src/wordpress + --owner "$user" --group "$group" + ) + targetTarArgs=( + --extract + --file - + ) + if [ "$uid" != '0' ]; then + # avoid "tar: .: Cannot utime: Operation not permitted" and "tar: .: Cannot change mode to rwxr-xr-x: Operation not permitted" + targetTarArgs+=( --no-overwrite-dir ) + fi + # loop over "pluggable" content in the source, and if it already exists in the destination, skip it + # https://github.com/docker-library/wordpress/issues/506 ("wp-content" persisted, "akismet" updated, WordPress container restarted/recreated, "akismet" downgraded) + for contentPath in \ + /usr/src/wordpress/.htaccess \ + /usr/src/wordpress/wp-content/*/*/ \ + ; do + contentPath="${contentPath%/}" + [ -e "$contentPath" ] || continue + contentPath="${contentPath#/usr/src/wordpress/}" # "wp-content/plugins/akismet", etc. + if [ -e "$PWD/$contentPath" ]; then + echo >&2 "WARNING: '$PWD/$contentPath' exists! (not copying the WordPress version)" + sourceTarArgs+=( --exclude "./$contentPath" ) + fi + done + tar "${sourceTarArgs[@]}" . | tar "${targetTarArgs[@]}" + echo >&2 "Complete! WordPress has been successfully copied to $PWD" + fi + + wpEnvs=( "${!WORDPRESS_@}" ) + if [ ! -s wp-config.php ] && [ "${#wpEnvs[@]}" -gt 0 ]; then + for wpConfigDocker in \ + wp-config-docker.php \ + /usr/src/wordpress/wp-config-docker.php \ + ; do + if [ -s "$wpConfigDocker" ]; then + echo >&2 "No 'wp-config.php' found in $PWD, but 'WORDPRESS_...' variables supplied; copying '$wpConfigDocker' (${wpEnvs[*]})" + # using "awk" to replace all instances of "put your unique phrase here" with a properly unique string (for AUTH_KEY and friends to have safe defaults if they aren't specified with environment variables) + awk ' + /put your unique phrase here/ { + cmd = "head -c1m /dev/urandom | sha1sum | cut -d\\ -f1" + cmd | getline str + close(cmd) + gsub("put your unique phrase here", str) + } + { print } + ' "$wpConfigDocker" > wp-config.php + if [ "$uid" = '0' ]; then + # attempt to ensure that wp-config.php is owned by the run user + # could be on a filesystem that doesn't allow chown (like some NFS setups) + chown "$user:$group" wp-config.php || true + fi + break + fi + done + fi +fi + +exec "$@" diff --git a/beta/php8.6-rc/fpm/wp-config-docker.php b/beta/php8.6-rc/fpm/wp-config-docker.php new file mode 100644 index 0000000000..ada2ee3c9e --- /dev/null +++ b/beta/php8.6-rc/fpm/wp-config-docker.php @@ -0,0 +1,139 @@ +